ProBox FNA Body with 1,000 kg Tail Lift on Iveco Daily
A mounted-version ProBox FNA body on an Iveco Daily chassis cab in the 5–7 t class, delivered road-ready with a BAR 1,000 kg tail lift, a side door and preparation for a single-zone refrigeration unit.
It is our standard FNA build: self-supporting GRP sandwich panels with a rigid polystyrene foam core (λ = 0.025 W/(m·K)), Performance Plus WR laminate inside and out, a stainless-steel rear portal and an aluminium subframe. FNA bodies are ATP type-approved for chilled transport, and the type test report ships with the body.
Specification
Internal 5,000 × 2,200 × 2,100 mm (23.1 m³); external 5,116 × 2,306 × 2,270 mm
Panels: floor 107 mm, side walls and rear doors 53 mm, front wall and roof 63 mm
Two-part rear doors opening to 270°; right-side door with a 900 × 2,000 mm opening
GripStar 600 anti-slip floor, 260 mm aluminium kickplates, Load Lock rails on both walls
Front wall and ceiling prepared for a single-zone refrigeration unit
BAR Cargolift BC 1000S2, 1,000 kg, aluminium platform with TracGrip surface, foot control
Cab roof and side spoilers, side underrun protection, rear camera preparation
Total equipment weight: 1,231 kg. 60-month body warranty.
Building on Iveco Daily or another 3.5–7 t chassis? The same body is available assembled, for mounting in your own workshop, or mounted by us.
See the full insulated and refrigerated range: https://probox.hoobrid.com/insulated-and-refrigerated-box-bodies
